The companies of the civil construction to each moment aim at to be distinguished in the installment of its services, taking care of the expectations of the customers who in fact are demanding, a time that, in the current days, quality is not restricted to who can pay more expensive for a product, and yes obligator factor for the recognition of who inside possesss it of the development of the company, incorporating the system of management of the quality. The system of management of the quality is based on a systematic process, aiming at an acceptable standard for who will inside use a product of the measures adopted in the manufacture of product, as the cement for example. In this article they will be presented measured essential for the storage of the cement, objectifying a standard to keep the product quality. The stage of the stockage represents one all singela phase of the process for the ideal performance of the cement, however that it makes executed difference when of correct form, preventing material wastefulnesses and generating economy. On the basis of this, the procedures for the storage of the cement are following: Evitar contact of the cement with the humidity is basic in the hour of the stockage, then the cement must be rank under wooden estrado (in plain surface), with height of 30 cm (0,30 m), with this prevents the contact with the ground that in turn, is propitious the humidity; the cement must be stored in stacks. These stacks must be moved away 30 cm (0,30 m) from the wall also to prevent the humidity, in case that it has, and in the maximum 50 cm (0,50 m) of the ceiling, in the case are always good for verifying if it does not have leaks when the stored one to be next the ceilings, an applicable solution is to place waterproof canvases on the stockage of the product in question; the cement does not have to be displayed the high temperatures and the low temperatures, this can affect its properties physicist-chemistries, diminishing total or partial its performance at the moment of its application, of preference its stockage must in local dry and be aired; In case that the cement arrives warm at the place of its stockage, is necessary to form stacks minors with space for ventilation; In case that the place of storage of the cement is in area the opened sky, uses it waterproof canvas; As presented in the item above, the cement must be stored in stacks, and these stacks do not have to exceed 10 cement bags, this prevent the load excess on the bags that if find initials of the stack formed in the stockage, beyond are clearly not to modify properties of the material; If the cement will be used before the tenth fifth day after its storage, are acceptable stacks with up to 15 bags, respecting the measures of removal of the walls, the ceiling and the ground; As organization form, the responsible for the storage must identify to each type of cement (when it arrived, type, manufacturer, etc.) from plates that are visible to who go to use the product; the stockage must in sequence be carried through aiming in the use of the act of receiving cement, that is, in way to use first the cement that if more finds the time in the supply; attention of the responsible one in relation to the standards of organization of the stockage of the cement, is basic, so that wastefulness of the material does not occur.


{ Comments are closed! }