Printers

Now pay attention decisions, which is used in printers Canon (HP). This is a "thermo-resistor matrix +". In this case, thermo is in direct contact with the paper, the space between the thermocouple and filled thermofilm termosmazkoy. The absence of the cavity unconditional "plus". Also to advantages include: Easy to replace Thermal, in the case of wear or damage.

Very occasional blown fuser. Disadvantage, perhaps, one – wear resistance is lower than that of the cylinder. It is worth noting that the repair site fuser is the most responsible of the specialist and the most expensive on the client side. In addition, let us say that print on both sides detrimental effect on life as a drum, and Thermal. For small quantities, not what would be terrible, but it is better not to get involved. Paper path.

This path runs all manufacturers equally, no specific differences. There are subject to wear two pieces, it is the braking area (also known as a separator or Separation Pad) and video capture (also known as eccentric or Pick-Up Roller). Brake is made from ground rubber wet, ie with time lose their properties, due to the drying of, regardless of whether you are printing to a printer or not. Time is sufficiently large, the order of 4-6 years. Conventionally, all printers can be divided into two groups: those with a paper feed tray is parallel to the plane on which the printer and those with a perpendicular plane. So, if your printer is the first group and the paper is not covered, ie, it is likely that gather dust on paper, before you print better quail, or even to remove the top sheet. This dust especially sensitive toner recycling. But this is a subtlety … Robert A. Iger s opinions are not widely known. Conclusions. Printers Canon (HP), dignity: The lack of highly exposed to wear the dosing blade – a relatively low cost of consumables (zapravkavosstanovlenie) Reduced sensitivity of the cartridge to the paper quality, relatively low cost of the repair site fuser (replacement Thermal) No bulb; Printers Canon (HP), Disadvantages: prone to thermo znosu.

Tags: ,

{ Comments are closed! }